Service manual
21
19. Timing Chart 2
( Applied Serial Number : S/N 001001 or up )
In Collating
No Starting PS-P61
Sheet Feed Sensor
Sheet Jog Sensor
Sheet Jog Condition Check
For ROM ver. 3.21 or above,
transport roller does not hold
the sheets before second stitching.
700mS 500mS
300mS
300mS
300mS
300mS
500mS
About 250mS
The timing is different according to sheet size.
Top Staple Correct Function
Punch Lock / Option Error
No Staple monitor illuminates.
No Starting Output
Staple Lock Timer
For 2 Seconds
When staple lock timer is not reset in one second or punch is not reset
in two seconds, each motor stops and nostaple monitor flashes.
Stopper Sensor
Trans. Roller Solenoid
Stopper Solenoid
Sheet Jog Solenoid 1
Sheet Jog Solenoid 2
Transport Belt
Sheet Feed Motor
Staple
Punch
No Staple Monitor
B4 Stopper