Service manual
11
9. LED and Connector Descriptions on P.C.B.
CON2 CON11 CON4 CON10
CON6 CON12
CON7 CON8 CON1 CON5 CON9CON3
L19
L18
L17
L16
L15
L14
L13
L12
L11
L10
L9
L8
L5
L6
L7
L2
L1
Control P.C.B. QPW457
LED Indication
L1 Staple Reset Position
L2 No Staple
L5 Punch Home Position
L6 No Starting PS-P61
L7 Staple/Punch
L8 Staple Home Position
L9 Not Used
Connector
CON1 To Staple Unit
CON2 To Sheet Size Sensor and Panel P.C.B.
CON3 To Solenoids and Transport Motor
CON4 To Sensors
CON5 To Transport Roller Solenoid and B4 Stopper
CON6 To Indicate Panel P.C.B LED
CON7 To Punch Unit
CON8 To Connector which connects Collator
CON9 To Power Supply 5V 24V
CON10 To Panel P.C.B Switch
CON11 To Sensors
CON12 To Staple Motor, Clutch, Blake and Pulse Sensor
L10 Transport Unit Open Sensor
L11 Not Used
L12 Sheet Feed Sensor
L13 Sheet Jog Sensor
L14 Stopper Sensor
L15 Staple Cabinet Rear Cover Open
L16 Staple Mode Button
L17 Eject Button
L18 Jog Button
L19 Punch Button
Illuminates at the reset position.
Illuminates when staples remain in cartridge.
Illuminates at the home position.
Illuminates when PS-P61 cannot start.
Illuminates when punch is selected.
Illuminates at home position.
Illuminates when transport unit is closed.
Illuminates when no sheets under sensor.
Illuminates when no sheets over sensor.
Illuminates when no sheets over stopper.
Illuminates when cover is open.
Illuminates when button is pressed.
Illuminates when button is pressed.
Illuminates when button is pressed.
Illuminates when button is pressed.