Service manual

10
8. Troubleshooting
J. When sheets are delivered without stapling. (Collating stops.)
K. When circuit breaker trips.
(Cause)
Collated sheets are not jogged
neatly.
(Remedy 1)
Open staple cabinet and check whether jog guide is
positioned to sheet size properly.
(Remedy 2)
Straighten curled sheets, and fan them well.
(Remedy 3)
Press jog switch and select 2-time jog.
(Remedy)
Turn off power switch of collator. Check inside of
collator for obvious problems such as jammed sheets. If
there is a problem, remove the cause. Reset circuit
breaker a few minutes after turning off power switch.
Push two left breakers to reset. Push up two right break-
ers to reset.