Service manual
9
H. When receiving tray lamp illuminates.
(Cause)
Receiving tray is full, or
sheets are not delivered
completely.
(Remedy)
Remove sheets from receiving tray, or delivery area.
8. Troubleshooting
E. When no staple/staple trouble lamp illuminates.
(Cause 1)
Out of staples.
(Cause 2)
Staple unit head is not set on
the proper position.
(Remedy 1)
Refill staples.
(Remedy 2)
Press eject button to reset staple unit.
F. When no staple/staple trouble lamp flashes.
(Cause)
Staple unit is locked because of
staple jam.
(Remedy)
Turn off power switch of collator, then open staple
cabinet and remove jammed sheets or staples. Close
staple cabinet, turn on power switch of collator and press
eject button. Staple unit will be reset. Check for proper
stapling by collating several sets (7 to 8 sets).
G. When door lamp illuminates.
(Cause)
Staple cabinet or rear cover is
open.
(Remedy)
Close staple cabinet or rear cover.
I. When sheets are delivered without stapling. (Collating Continues.)
(Cause)
Staples are not fed to stapling
position in staple unit.
(Remedy 1)
Set unnecessary sheets on bin, and check for proper
stapling by collating several sets (7 to 8 sets).
(Remedy 2)
Open staple unit, pull up and release staple cartridge
and clean staple feed roller with alcoholic soaked cloth.