Operating instructions

- 32 -
IDEAL 4810-95 • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP


B
A
C
The 3 eccentrics are now exposed and should
be turned counter clockwise to position "0"
with the special wrench and attachable
extension pipe (A) (in the tool set). The slot
must correspond to position "0" (B).
Only IDEAL 4810-95, 4850-95/EP
Unscrew the blade screws (C) on the right
hand side.
Clamping
Blade
OK
OK
•
Blade and cutting stick replacement
•
Remove the special wrench and turn on the
main switch until the blade returns to the home
position.
Warning by IDEAL 4810-95
Do not turn main switch to position "0"
whilst blade is moving upwards!
The clamp must always overlap the blade!
Danger! Risk of injury!