User manual
Seite: 18/22
technische Beschreibung / technical description myAVR Board MK3 3.10
www.myAVR.de © Laser & Co. Solutions GmbH – 07/2009 www.myAVR.com
Programmereinstellungen AVR Studio (4.15.623)
changing setting in AVR Studio (4.15.623)
Schließen Sie das myAVR Board MK3 an das Rechner-
system an und versetzen den mySmartUSB MK3 Pro-
grammer in den Mode STK500 (näheres dazu, finden Sie
im Abschnitt zur Tochterplatine mySmartUSB MK3, sowie
der Technischen Beschreibung zum mySmartUSB MK3).
Starten Sie AVR Studio und wählen Sie den Menüpunkt
Tools/Programm AVR/Connect... Wählen Sie hier, unter
„Platform“ STK500, sowie den Port. Mithilfe der Schaltflä-
che Connect wird nun die Hardware konfiguriert. Abhängig
von der myAVR Stamp können Sie den Controller aus-
wählen. Im Beispiel wurde die myAVR Stamp 256 PLUS
mit einem ATmega2650 verwendet. Anschließend ändern
Sie „Programming Mode“ und speichern die Einstellungen
über die Schaltfläche Read Signatur. Als Ergebnis sehen
Sie die Signatur der Hardware (vgl. Bild).
Programme können Sie nun in der Registerkarte „Pro-
gram“ mit Hex-Files laden.
At first you attach the myAVR Board MK3 to the computer
system and put the mySmartUSB MK3 into the STK500
modus (you find more informations to that, in the section
of the mySmart USB MK3 and in the technical description
of the mySmartUSB MK3).
Start the AVR Studio an choose in the menu
Tool/Programm AVR/Connect… Now you select in the
platform list “STK500”, your port and press on the “Con-
nect” Button. The Software search the myAVR Board
MK3. Addicted from the myAVR Stamp you can select the
processor. In the example the myAVR Stamp 256 was
used plus with an ATmega2650. After that, you must be
changed the “programmer mode” and press the Read
Signature button, to safe the settings. The results of that,
you see the signature of the hardware (cf. picture).
Your programms can be load with hex-files in the pro-
gramm tab.
?
Status-LEDs
status-LEDs
Prog-Mode:
abhängig vom Zielsystem
prog-mode:
depending on target system
Mode-Taster
mode-button
Auswahl:
Taster kurz tippen
Choise:
press button short
Mode: STK500