User manual

Seite: 16/22
technische Beschreibung / technical description myAVR Board MK3 3.10
www.myAVR.de © Laser & Co. Solutions GmbH – 07/2009 www.myAVR.com
Programmereinstellungen in BASCOM (1.11.9.1)
changing setting in BASCOM (1.11.9.1)
Versetzen Sie den mySmartUSB MK3 Programmer in den
STK500 Mode (näheres dazu, finden Sie im Abschnitt zur
Tochterplatine mySmartUSB MK3, sowie der Technischen
Beschreibung zum mySmartUSB MK3).
Unter dem Menüpunkt Options/Programmer können Sie
die Einstellungen für den Programmer vornehmen. Hierzu
wählen Sie, wie auf den Bildern ersichtlich, den Modus
STK500 extended, sowie den COM-Port aus. Abschlie-
ßend klicken Sie auf Ok und Ihre Einstellungen werden
übernommen.
Put the mySmartUSB MK3 into the STK 500 compatibility
modus (you find more informations to that, in the section
of the mySmartUSB MK3 and in the technical description
of the mySmartUSB MK3).
You can carry out the attitudes for the Programmer under
the menu item Options/Programmer. Then you will select
the STK500 extended mode and as well as the respective
COM port. In conclusion click on Ok and her attitudes
were taken on.
?
Status-LEDs
status-LEDs
Prog-Mode:
abhängig vom Zielsystem
prog-mode:
depending on target system
Mode-Taster
mode-button
Auswahl:
Taster kurz tippen
Choise:
press button short
Mode: STK500