User manual
Technische Beschreibung
/ technical description myAVR Board MK3 3.10
Seite: 15/22
www.myAVR.de © Laser & Co. Solutions GmbH - 07/2009 www.myAVR.com
Programmereinstellungen in AVRDUDE (5.5)
changing setting in AVRDUDE (5.5)
Versetzen Sie den mySmartUSB MK3 Programmer in den
Mode AVR 109,911,910 (näheres dazu, finden Sie im
Abschnitt zur Tochterplatine mySmartUSB MK3, sowie der
Technischen Beschreibung zum mySmartUSB MK3).
Starten Sie AVRDUDE über die Kommandozeile. Es wer-
den Ihnen alle verfügbaren Befehle angezeigt. Hier ein
Ausschnitt.
Put the mySmartUSB MK3 into the AVR 109,911,910
compatibility modus (you find more informations to that, in
the section of the mySmartUSB MK3 and in the technical
description of the mySmartUSB MK3).
After that start the AVRDUDE with the command line. That
will show you all instructions, which are available. Here a
clipping..
?
Status-LEDs
status-LEDs
Prog-Mode:
abhängig vom Zielsystem
prog-mode:
depending on target system
Mode-Taster
mode-button
Auswahl:
Taster kurz tippen
Choise:
press button short
Mode: AVR 109,911,910
Hier sehen Sie einen Beispielbefehl zum Brennen eines
Beispielprogramms.
Here you see a command example to burn a program.