User manual
technische Beschreibung (kurz) / technical description (short) myEthernet 2/4
www.myAVR.de © Laser & Co. Solutions GmbH - 08/2008 www.myAVR.com
Pin 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Port am
ATmega
644P
A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 A0 A1 A2 A3 C0 C1 C2 C3 C4 C5 D0 D1
Erste Schritte
/
First Steps
1. Vorbereitung:
• Sicherstellen, dass kein Strom am myEthernet anliegt
und die MikroSD-Karte eingelegt ist
2. Ethernet anschließen
• das myEthernet mit Hilfe eines handelsüblichen Netz-
werkkabels an den Netzwerkswitch bzw. HUB anschlie-
ßen
3. Spannungsversorgung
• 5V geregeltes Gleichstrom Netzteil an die Pins 5V und
GND anschließen
• grüne Status-LED leuchtet bei erfolgreichem Anschluss
4. Webserver testen
• folgende URL in den Internet-Browser eingeben:
"http://192.168.20.96/index.htm"
• die myEthernet Startseite erscheint bei erfolgreicher
Verbindung
1. preparation
• ensure that there is no power on the myEthernet and the
microSD-Card is inserted into the slot
2. connect the ethernet
• connect the myEthernet with a network cable to the net-
work-switch or a hub
3. power supply
• use a regulated 5V DC power supply unit
• if the connection was successful the green status LED is
glowing
4. Testing the web server
• type the following URL into your web browser:
“http://192.168.20.96/index.htm”
• the myEthernet home page will pop up if the connection
was succeed
Schnittstellen
/
Interface
Pin 0
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
Pin 11
5 V
GND
Pin 12
Pin 13
Pin 14
Pin 15
Pin 16
Pin 17
}
UART
9 = MISO
7 = SCK
5 = RESET
3 = GND
1 = MOSI
10 = GND
8 = GND
6 = GND
4 = GND
2 =
5 V
10-polige ISP-Schnittstelle für die Programmierung
sowie die Spannungsversorgung des ATmega644P
10 pin ISP interface for the programming and the
power supply of the ATmega644P
GND
5 V
Pin 0
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8 (SS SPI)
Pin 9 (MOSI SPI)
Pin 10 (MISO SPI)
Pin 11 (SCK SPI)
5 V
GND
Pin 12
Pin 13
Pin 14
Pin 15
Pin 16
Pin 17
Pin 18 (TWI/I²C)
Pin 19 (TWI/I²C)
Pin 20 = LED grün /
LED green
Pin 21 = LED rot /
LED red
Pin 22 = RxD
Pin 23 = TxD