User manual

myEthernet Technische Beschreibung / technical description 7/48
www.myAVR.de © Laser & Co. Solutions GmbH – 06/2009 www.myAVR.com
myEthernet:
Die Kommunikation über das Netzwerk wird mit
dem Mikrocontroller ENC28J60 realisiert. Der
Datentransfer des embedded Webservers wird
durch das Protokoll HTTP umgesetzt. Als
unterliegende Protokolle arbeiten dabei das
Transportprotokoll TCP, das Vermittlungs-
protokoll IP, ICMP und in der untersten Ebene
die Bitübertragung per Ethernet.
myEthernet:
The communication via the network will be
realized with the microcontroller ENC28J60.
The data transfer of the embedded web server
will be implemented through the protocol HTTP.
As underlying protocols work the transport
protocol TCP, the exchange protocol IP and in
the first-line level the bit transfer via
myEthernet.
Pin 0 1 2 3 4 5 6 7 8 9 10 11 12
Port am
ATmega 644P
A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 A0
Pin 13 14 15 16 17 18 19 20 21 22 23
Port am
ATmega644P
A1 A2 A3 C1 C0 C2 C3 C4 C5 D0 D1
Pin 0
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
Pin 11
5 V
GND
Pin 12
Pin 13
Pin 14
Pin 15
Pin 16
Pin 17
Pin 0
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8 = SS
Pin 9 = MOSI
Pin 10 = MISO
Pin 11 = SCK
5 V
GND
Pin 12
Pin 13
Pin 14
Pin 15
Pin 16 = SDA
Pin 17 = SCL
Pin 18
Pin 19
Pin 20 = LED grün /
LED green
Pin 21 = LED rot /
LED red
Pin 22 = RxD
Pin 23 = TxD
}
UART
}
TWI / I²C
SPI
9 = MISO
7 = SCK
5 = RESET
3 = GND
1 = MOSI
10 = GND
8 = GND
6 = GND
4 = GND
2 =
5 V
10-polige ISP-Schnittstelle für die Programmie
rung
sowie die Spannungsversorgung des ATmega644P
10 pin ISP interface for the pro
gramming and the
power supply of the ATmega644P
GND
5 V