User manual

6/48 myEthernet Technische Beschreibung / technical description
www.myAVR.de © Laser & Co. Solutions GmbH – 06/2009 www.myAVR.com
2 Technische Details
2.1 Funktionen
2.1.1 Schnittstellen / Protokolle
2 Technical details
2.1 Functions
2.1.1 Interfaces / protocols
Pinübergreifende Funktionalität:
Der Mikrocontroller ATmega644P bietet neben
der bitweisen Ein / Ausgabe auch eine
byteweise Ein / Ausgabe über 8 Pins, diese
werden zusammengefasst auch als PortA / B
bezeichnet.
TWI / I²C:
Ist ein serieller Datenbus, der über 2 Leitungen
kommunziert. Er erlaubt die Adressierung von
bis zu 128 Geräten.
SPI - Serial Peripheral Interface:
Ist ein Bussystem für eine synchrone serielle
Datenübertragung. Dabei werden 3 Leitungen
für MOSI (Master out Slave in), MISO (Master in
Slave out), SCK (Serial Clock) und eine für SS
(Slave Select) verwendet.
UART - Universal Asynchronous Receiver
Transmitter:
Serielle Kommunikation ohne Taktsignal.
Empfänger und Sender synchronisieren sich
durch Start- und Stopp-Bit.
ISP - In-System-Programmierung:
Programmieren Sie direkt im Einsatzsystem
ohne den zu programmierenden Mikrocontroller
herauszunehmen.
MicroSD-Karte:
Um Zugriff auf eine Vielzahl an Dateien sowie
einen robusten Datenspeicher zu besitzen, ver-
fügt das myEthernet-Board über eine Schnitt-
stelle für MicroSD-Karten. Diese wird über den
Mikrocontroller ATmega644P gesteuert.
Pin functionality across:
The microcontroller ATmega644P offers
between the bit by bit input / output also a byte
by byte input / output over 8 pins. These 8 pins
were also summarised to portA / B.
TWI / I²C:
That’s a seral data bus which communicates
via two lines. He alows the addressing up to
128 devices.
SPI – Serial Peripheral Interface:
Thats a bus system for a synchronous serial
data communication. Thereby three lines will be
used for MOSI (Master out Slave in), MISO
(Master in Slave out), SCK (Serial Clock) and
one for SS (Slave Select).
UART Universal Asynchronous Receiver
Transmitter:
A serial communication without clock signal.
Receiver and transmitter synchronise them
through a start and stop bit.
ISP in system programming:
Programming directly in the using system
without taking out the microcontroller which is
programmed.
microSD-card:
To have access to a multiplicity of files and a
robust data memory the myEthernet has an
interface for microSD-cards. This interface will
be controlled through the microcontroller
Atmega644P.