User manual
22/48 myEthernet Technische Beschreibung / technical description
www.myAVR.de © Laser & Co. Solutions GmbH – 06/2009 www.myAVR.com
4.6 Test der Netzwerkverbindung
Haben Sie das myEthernet (MicroSD-Karte mit Anpassung
ist eingeschoben) mit einem Netzwerkkabel in Ihrem
Netzwerk angeschlossen und die Stromversorgung
hergestellt, dann können Sie einen Verbindungstest
durchführen. Nach dem Starten des myEthernet wird die
Konfiguration entsprechend der Einstellungen in der Datei
„config.cfg“ vorgenommen. Ist die Initialisierung ohne Fehler
durchgelaufen, dann leuchtet die grüne LED des
myEthernet.
Verbindungsprüfung mit dem PING-Befehl:
Innerhalb der Commandshell kann per Ping auf die
Standard- bzw. angepasste IP-Adresse ein
Kommunikationstest gestartet werden. Bei jedem
Pingversuch blinkt die orange LED am Netzwerkport des
myEthernet.
4.6 Testing of the network connection
When you have connected the myEthernet with your
network via a network cable (the microSD-card is in-
serted with the configurations) and a power supply is
secured then you can make a connection test.
After starting the myEthernet the configuration will be
made according to the settings in the file “config.cfg”.
When there is no mistake in the running of the initializa-
tion the green LED of the myEthernet lights.
Connection test with the ping command:
A communication test can be started in the command-
shell via ping on the standard or adapted IP address.
Ping in der Commandshell / ping in the commandshell
Aufruf der Willkommensseite des myEthernet-Web-servers:
Starten Sie einen Webbrowser z. B. Microsoft Internet
Explorer oder Mozilla Firefox und geben Sie in der
Adresszeile
http://192.168.20.96 ein.
Ist die Konfiguration erfolgreich, dann sehen Sie die erste
Webseite des myEthernet-Webservers wie auf dem
folgenden Bild.
Calling the welcome site of the myEthernet web server:
Please start a web browser e.g. Microsoft internet ex-
plorer or Mozilla Firefox and enter http://192.168.20.96 in
the address line.
If the configuration is successfully then you’ll see the first
website of the myEthernet web server like on the
following picture.
myEthernet Webserver Willkommensseite
myEthernet web server welcome site