Datasheet

Flyport Wi-Fi and Ethernet Programmer's guide framework 2.3 (rev 1.0) www.openpicus.com
Flyport Overview
Flyport Hardware
Flyport Wi-Fi is a wireless device embedding a Microchip PIC24FJ microcontroller and a Wi-Fi transceiver. It
has a 26 pin connector to communicate with external electronics, and it can be powered with 3.3 or 5V.
Flyport Ethernet is a wired LAN device embedding a Microchip PIC24FJ microcontroller and an Ethernet
transceiver. Plus the same 26 pin connector of Wi-Fi version, this module has a second 26 pin connector with
the RJ45 signals and some I/Os.
figure Flyport Wi-Fi and Flyport Ethernet
Flyport is a standalone system. It embeds the TCP/IP stack to control the Wi-Fi/Ethernet and it can be
programmed with user-written firmware to accomplish actions as controlling relays, reading digital and analog
IOs, communicating with a UART, I2C or SPI buses, and so on. The PIC24 is a 16 bit, 16 MIPS microcontroller
with 256 KB flash memory and 16 KB of RAM. To be used as a web server (with HTML pages and AJAX
6