Instruction manual

PC/VDT PROGRAMMING - BATCH ENROLL KEYPAD CODES
9-218
System 2 Installation / Programming Manual
System Function While Batch Loading
IMPORTANT NOTE: The system will not process door inputs while batch loading is in
operation. This means that users entering their codes at a door will not be granted access
while the system is batch loading. For this reason it is important that batch loading be
performed at non-peak times so as to minimize user inconvenience.
While batch loading is in progress, the VDT will display:
Please Stand By...
After batch loading is completed, the VDT will display:
Use Up to 4 Digits
0=Quit
First User # [____]
If you wish to batch program additional users, with a different Seed Number enter the desired
first user number followed by ENTER at the First User # [_ _ _ _] prompt. If you
are finished batch programming users press 0 and ENTER.
Memory Full
At some point, you may enter the maximum number of users supported on your System 2.
Should this happen, the VDT will display the instructions:
Press Any Key
No More Room!
You now have a decision to make. Either remove any unused codes, or call Corby about
purchasing the memory expansion option. After successfully entering all users, the unit will
return to the Main Menu.