Instruction manual

LCD PROGRAMMING - BATCH ENROLL CARDS
8-129
System 2 Installation / Programming Manual
Please Stand By . . .
Use Up to 4 Digits þþþþ
First User # [ _ _ _ _ ]
Press Any Key
No More Room!
System Function While Batch Loading
IMPORTANT NOTE: The system will not process door inputs while batch loading is in
operation. This means that users entering their codes at a door will not be granted access
while the system is batch loading. For this reason it is important that batch loading be
performed at non-peak times so as to minimize user inconvenience.
While the system is batch loading, the LCD will scroll:
After batch loading is completed, the LCD will scroll:
Scrolling Options: 0=Quit
If you wish to batch program additional users, with a different Seed Number enter the desired
first user number followed by a # (enter) at the First User # [ _ _ _ _ ] prompt. If you are
finished batch programming users press 0 and # (enter).
Memory Full
At some point, you may enter the maximum number of users supported on your version of
System 2. Should this happen, the LCD will scroll the instructions:
You now have a decision to make. Either remove any unused codes, or call Corby about
purchasing the memory expansion option. After successfully entering all users, the unit will
return to the Main Menu.