Installation manual

D9124 Operation & Installation Manual
Page 17
© 1996 Radionics
74-06799-000-D 2/96
SIREN/SPEAKER
NAVIGATION KEYS
ALARM SILENCE
TROUBLE SILENCE
DETECTOR RESET
ANNUNCIATOR RESET
*
F
I
R
E SYS
T
EM *
ALPHA NUMERIC DISPLAY
FUNCTION KEYS
Radionics
ESC PREV NEXT ENT
SOUNDER
NAVIGATION KEYS
FIRE
ALARM
ANNUNCIATOR
*
F
I
R
E SYS
T
EM *
ALPHA NUMERIC DISPLAY
Radionics
PREV NEXT
Figure 9B: D1256 Fire Command Center
Figure 9C: D1257 Remote Fire Annunciator
Command Centers and Annunciation Devices
0
89
32
56
7
4
AREA X IS OFF
PREV
ESC
ENT
1
ALL
RESET
WATCH
SPECIAL
COMMAND
MENU
YES
NEXT
PARTIAL POLICE
BYPASS
INSTANT
DELAY
ALPHA NUMERIC DISPLAY
FUNCTION KEYSSIREN/SPEAKER
Descriptions
D1255 and D1255R Command Centers
The D1255 Command Center is a digital
system control station with a 16-character
alphanumeric display. It provides system
control for the D9124 System. Housed in
white plastic, it displays text identifying
specific initiating and supervisory devices.
Its keypad has numbers 0 - 9, a command
key, and four menu keys, allowing you to
passcode protect selected system control
functions so that you can install it
more exposed to the public. You can mount
the D1255 on the D56 surface mount box.
The D1255R has the same features as the D1255,
but it is housed in red plastic. You can mount the D1255R on the D56R red surface
mount box.
D1256 Fire Command Center
The D1256 Fire Command Center is a
digital fire system control station with a 16-
character alphanumeric display. It provides
system control for the D9124 System.
Housed in red plastic, it displays text
identifying specific initiating and supervisory
devices.
One D1256 included installed on D9100:
The D9100 Accessory Module includes an
installed D1256 Fire Command Center. To
make the installed D1256 operational, refer
to the D1256 Fire command Center and D1257 Fire Alarm Annunciator Installation
Instructions (74-06925-000). Only for the D1256 installed in the D9100 module, disregard
the sections titled Mounting the D1256 and D1257 and Wiring the D1256 , and follow the
instruction in the section titled Programming the Control Communicator .
D1257 Remote Fire Annunciator
The D1257 Remote Fire Annunciator
displays system information. It can be
mounted in areas of public access because
it does not provide system control. It
displays text identifying specific initiating
and supervisory devices.
Do not mount command centers or
annunciators where they will be exposed to
sunlight. Sunlight can damage internal
components, and interfere with display
visibility. Do not mount command centers
or annunciators in wet or moist locations.
Figure 9A:
D1255/D1255R Command Center