Instruction Manual

CHARGING THE BLUETOOTH SPEAKER
(Be sure to fully charge the speaker before using for the first time.)
-Plug the standard USB charging cable into the speaker and a
powered USB port.
-The LED light is red when charging. The light will turn off when
the battery is fully charged.
Remark:
1. The Bluetooth speaker can be used during charging.
2. The LED flash red quickly and there is prompt sound when it is
a low battery.
3. Please use the offered 2.1A cable to charge the speaker.
SPECIFICATIONS
Speaker:40mm (120-20KHZ)
Power out: 3W*2 4Ω
SNR:90±5dB
Built-in battery: 2000mAh
Charging time: up to 4.5 hours
Playing time: up to 7 hours
Product net weight: 330g
Charging standard: DC 5V, 1A
Wireless Charging Input: DC 5V, 2A
Wireless Charging Output: DC5V, 1A, 5W
NOTE: This equipment has been tested and found
to comply with the limits for a
Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a
residential installation. This equipment generates
uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this
equipment does cause harmful interference to radio
or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the
receiver is connected.