Specifications

the hot mode icon flashes. The initial setting is 100
◦
C and a speed of six. Set the machine ac-
cording to the lamination settings guide in Figure 10. When the machine is ready, the ready icon
appears and it beeps three times.
The list below describes the machine settings, please refer to Figure 11 for the control layout
and button functions.
• To increase or decrease temperature, use the up or down temp buttons.
• To laminate faster, use the UP or DOWN speed buttons
• To see current roller tempature, press MEAS
• To stop the rollers, press STOP
Figure 10: Lamination Settings Guide
9