Specifications

Blade is not Cutting Cleanly through Paper
1. Rotate cutting base for a smooth cutting surface.
2. If the blade is not cutting through stacks adequately, then it may need to be sharpened or
replaced. Refer to the Operator’s Manual for instructions on repairing or replacing the blade.
Scoring
The crease/perforation machine has a front and rear sliding stop, as well as an angular stop.
Determine theposition of these with the millimeter/inch ruler at both sides of the machine. The
composite bar has crease slots on one side and a softer perforating surface on the other, rotate the
bar 180
◦
to change from a wide crease to a narrow crease. Turn the bar up to the softer surface for
perforations.
Score all folded card stock covers, quickstarts, and inserts. Use the short grain 80 lbs. paper
for creasing and the long grain 80 lbs. paper for cutting. Score one item at a time to ensure a
proper score and to prevent damage to the device.
• The CreaseMaster can score up to 750 pieces of paper or cardstock per hour.
• The CreaseMaster is compatible with many different sizes of paper. The smallest pieces it
can handle is 5” x 1” while the largest can be up to 17” in long. You can use this device to
score everything from typical 20 lb. bond paper as well as cardstock that has an 18 point
thickness.
• This machine has 4 different scoring widths so you can get the right crease for your paper or
cardstock. The widths are 0.5, 1.0, 1.5, and 1.8 millimeters. You can score your documents
on either a 45 or 90 degree angle - just choose the setting that feels the most comfortable to
you. Also, it performs both regular and inverted creases.
• Machine measures 30” (width) x 19.5” (depth) x 9” (height) and weighs less than 30 pounds.
• The CreaseMaster is very durable thanks to its solid steel construction. You are be able to
get a lot of use out of it for years to come. Also, it comes with a 5-year warranty which is
one of the most generous warranties you’ll ever come across.
Scorer Troubleshooting
The “Graphic Whizard Model GW MCOSP Manual Crease and Perforation Machine” has a five
year warranty that ensures we can repair or replace the scorer as needed. Contact Decagon’s My-
Binding.com representative Ashley Franta at 800-944-4573 to report damage and arrange for repairs.
Laminator
Laminate items like Quick Starts and inserts according to the Description instructions in M3 and
the Print Station Spreadsheet on the benchtop.
For Hot lamination, hold the “Hot/Cold” button for 1 second, the LCD display turns on, and
8