Specifications

Figure 11: Control Panel Layout/Functions
Binding:
Ensure that the document you are binding is an appropriate size for the wire spirals and that
all settings on the machine are correct. Use the size guide on the machine to determine the correct
size spiral bindings to use and the appropriate machine settings. Follow steps 1 through 4 to bind
manuals.
1. Punch holes in your document at around 20 pieces of paper per punch, make sure to justify
the paper and punch in consistent locations.
2. Then attach the wire binding to the Wire Snatch to place punched manual on binding.
3. Once you have threaded binding wire through holes, ensure the Master Selector is set accord-
ing to the size of your manual and then place the manual binding edge down in the Wire
Closer.
4. Pull the handle to close the Wire Closer and then view the finished product to ensure a good
binding, adjust the Master Selector to get the perfect pitch and closure.
10