Instruction manual

41
7. Installation
7-1 Installation
Legs
2
Props
3
Top Panel
1
Back Panel
1
Top Lid
1
Hexagon
Bolts
6
Washers
6
Assembling the pedestal for PC-45.
2. Insert one end of the prop (3 pcs) into the
large holes at the right leg and fix the
props with the spring washers and the
hexagon head bolts with using of the
supplied box wrench.
3. Put the back panel on the props and
secure them to the left leg.
4. Place the both semi-assembled legs on the
flat floor and secure firmly the hexagon
head bolts at the left leg.
5. Fit a top lid on the top panel and mount it
on the leg assembly as shown in the right
drawing.
6. Mount the PC-45 machine on the top
panel so that the hooks on the right leg are
fitted in the bottom notches of the PC-45
machine.
Large Hole
Props
Top Panel
Top Lid
Back
Hook
Spring Wash-
Hexagon
Front
Left Leg
Right