Instruction manual
37
6. Maintenance
6-6 Lubrication (Monthly)
Lubricate the following sections to maintain
PC-45 in the best condition.
1. Turn on power with key switch.
2. Press the Standby button.
- Check that the Standby button lights.
3. Turn clamper hand wheel to lower
clamper to the surface of table.
4. Press cut buttons A and B to lower knife.
Release cut buttons when clearance be-
tween knife and cutting stick is about 5
mm, and knife will stop.
5. Turn off with key switch.
6. Open adjustment section covers (right and
left).
7. Lubricate sliding faces between marks.
8. Close tops of lubricate section.
4
5
6
3
2
1
5mm
Knife
Adjustemt Section Covers
Cut Button BCut Button A
Cutting Stick
Lubricate Section
Lubricate Section
Standby Button