Instruction manual
32
6. Maintenance
Knife
Knife Holder
6-2 Knife Replacement
4
5
6
3
2
1
Knife Holders
Knife
4
5
6
3
2
Knife Holders
Knife Securing Bolts
Knife Securing Bolts
The Right Side of
Knife
Knife Holders
3. Fasten two knife holders in center two
holes in the right drawing.
NOTE
- Be careful not to mistake the right side of
knife.
WARNING
- Fastening knife holder insufficiently
may cause knife to fall and severe
injury to operators as a result. Do put
screw section of knife holder com-
pletely as shown in the drawing below.
4. Open front cover.
5. Raise knife holders fitting knife securing
groove and slide knife holders to the right.
6. Fasten knife securing bolts with box
wrench, lifting knife with knife holder.
7. Remove knife holder and fasten two knife
securing bolts there with box wrench.