Instruction manual

26
6. Maintenance
4
5
6
3
2
1
P O W E R
C U T T E R B
O F F
O N
Key Switch
Clamper Hand Wheel
Clamper
Cutting Stick
6-1 Cutting Stick Replacement
When the groove on cutting stick gets deep,
last sheet is left uncut or torn off. Replace
cutting stick with new one.
WARNING
- Do not touch knife. Otherwise you
may be injured.
NOTE
- If knife remains on half way, press cut
button A and B separately with the interval of
0.5 seconds or more to return the knife to the
home position.
Tool:
1. Straight Screwdriver
1. Turn off power by turning key switch
counterclockwise.
2. Turn clamper hand wheel counterclock-
wise to raise clamper fully.
3. Insert Straight Screwdriver into the bot-
tom of cutting stick and remove cutting
stick.