Instruction manual

10
2. Safety Function Check
2-3-4 Check on One Cycle
Check that knife remains stationary if cut
buttons are continued to press after knife
returns to home position.
1. Continue pressing to cut buttons about 5
seconds after knife returns to home posi-
tion. Check that knife does not work
again.
Next, check that knife remains stationary
unless both hands are released from cut
buttons.
2. Release your hand from cut button B with
cut button A pressed.
3. Press cut button B again. Check that knife
does not work.
2-3 Check on Safe Functions
4
5
6
3
2
1
Knife
Cut Button B
Cut Button A
2-3-3 Check on Automatic Return of Knife
Check that knife at bottom position returns to
home position automatically and then stops.
1. Press cut buttons A and B at the same
time.
2. Release your hands from cut buttons when
knife is on the way to home position.
- Check that knife returns to home position
without stopping and then stops at home
position.