Instruction manual
9
2. Safety Function Check
2-3 Check on Safe Functions
4
5
6
3
2
1
Clamper Hand Wheel
Front Cover
Cut Button A
Cut Button B
WARNING
- Do not put your hands under knife
while power is on.
- Assign only "ONE" operator to oper-
ate PC-45.
If your PC-45 do not work as shown in this
book, ask your local dealer to fix the PC-45.
2-3-2 Check on Front Cover
Standby Button
2-3-1 Check on Standby Button
Check that knife work only when Standby
button is pressed.
Check that the lamp on Standby button is
turned off.
1. Lower clamper to the bottom with clamper
hand wheel.
2. Check that knife does not work in spite of
pressing cut buttons A and B at the same
time.
3. Press the Standby button.
- Check that the Standby button lights.
Check that knife do not work while front
cover is open.
1. Lower clamper to the bottom with clamper
hand wheel.
2. Open front cover.
3. Check that knife does not work in spite of
pressing cut buttons A and B at the same
time.
4. Close front cover.