Instruction manual

29
Creating a Cutting Program (Correct) Operation Procedures
3-6 Creating a Cutting Program (Repeat Cutting Program)
When using the button, the program
to cut the sheets for the same length con-
tinuously can be easily input.
This section explains how to use the repeat
function.
Example:
420 mm sheets are cut to 410 mm, and then
the rest of the sheets are divided evenly by
90 mm.
Input 410 for the step 1.
- Press the keys. The
backgauge moves to the input position and
stops.
- Check the position and press the key.
The step 2 can be input.
Press the button and set the
repeat of the step.
- The “repeat” mark appears on the guide win-
dow.
- When you press the button again, the
“repeat” mark disappears.
Input the repeat cutting length 90.
- Input the keys.
10 90 90
420
90 90 50
0
50
140 230 320 410
En
t
014
En
t
1: 410.0
1/0
5
1:0
1/0
5
2:0
2/0
5
5
2:0
2/0
The value for step 1 is
ready to be input.
The value of step 2 is
ready to be input.
The value of step 2 is
ready to be input.
(With repeat mark)
En
t
09
2:90.0
2/0
5
The repeated cutting
length is input.