Instruction manual

23
Creating a Cutting Program (Input) Operation Procedures
3-6 Creating a Cutting Program (Input)
When repeating a complicated cutting job,
it is helpful to create and save the process
to a cutting program. (Up to thirty pro-
grams can be saved.)
This section explains how to create or cor-
rect the cutting programs.
[Creating a New Program]
Press the button.
- The LED on the upper left of the program
memory button is illuminated and shows that
the “program memory” is selected.
- “SELECT COURSE (1-30)” appears in the
guide window.
Input the course number for saving
the program.
- For example, this procedure explains how to
save a new program into the course number 14.
- Press the keys on the
numeric keypad. The guide window will be
ready to input the cutting length value for the
step 1.
The job name of the course number
should be written down when program-
ming.
To check the process of the course,
press the button.
WARNING
This machine must be operated by just one
person at a time.
CAUTION
Do not cut anything besides paper. This
may damage the machine.
SELECT COURSE
(
1-30
)
1
LED
The course
number can
be input.
1 4
En
t
1 / 0
1:0
COURSE14
The value for
the step 1 is
ready to be
input.
When the course number 14 is
input,