Instruction manual

20
3-4 Function Cutting
This section explains how to recall the cut-
ting job performed most frequently using
the function keys M1 through M3.
Three programs can be saved. Call the ser-
vice representatives of your local dealer.
The following steps explain the function
cutting using the key.
Example:
:
Press the key of the function
keys.
- The program saved in is recalled. The
backgauge moves to the position of the step 1
and the machine becomes ready to be oper-
ated.
Place the sheets.
- The maximum cutting height is 60 mm (2.36”).
- Arrange the sheets by aligning them with the
backgauge and side guide.
Do not pile the narrow sheets high.
Place the sheets on the other side so that
the clamp does not incline widely.
M1
M2
M3
Write down your own program value for your reference.
M
3
M
3
1:209.0 2:296.0 3:295.0
M
3
M
3
2:296.01:209.0
M 3 1 / 3
Guide Window
Step 1
Step 2
WARNING
This machine must be operated by just one
person at a time.
CAUTION
Do not cut anything besides paper. This
may damage the machine.