Instruction manual

- 37 -
cm
inch
B
A
Cut cannot be made.
• Measurement has not been reached
correctly. LED "S" does not turn off.
 Push the
S
button again.
• Measurement below 9 cm.
 Hold the
S
button until the
measurement is achieved.
•
Oil pressure set too low.  Increase oil
pressure at rotary control (A).
•
Hydraulic oil shortage.  Check hydraulic
oil level (B), if necessary, top up.
•
Backgauge not in the right position,
"
C" on display.  Contact your dealer.
•
Possible malfunctions
•