Instruction manual

- 28 -
EBA 551-06 • EBA 551-06 LT
AB
C
E
D
E
D
A
B
Take the exchange blade carefully out of the
blade box and screw it to the blade changing
tool (D).
•
Check, if when using the upper threads (B),
the blade (E) is protected.
•
The blade is not protected  Use the lower
thread (C) for fixing. The screws (A) may not
exceed at the rear side of the blade.
Danger!
Blade (E) must be protected.
Mount the blade with the blade changing
tool (A) ...
... and tighten with screws (B) in upper
position.
Blade must be in the upper position.
•
Blade and cutting stick replacement
•