Instruction manual

- 24 -
EBA 551-06 • EBA 551-06 LT
B
A
C
D
•
Set mains switch (A) to position "I" .
•
Set clamping oil pressure (B) to min. 50 bar.
•
Press in blade locking key (C).
•
Activate cutting  blade remains in lowest
position.
•
Set mains switch to position "0".
Remove the left screw (D), using the
extension.
Pull out blade locking key  blade moves to
the top.
•
Blade and cutting stick replacement
•