Service manual

3.0 Maintenance Guide
9
3.2.3 Machine Exterior
• The machine’s exterior should be cleaned with a non-abrasive water based detergent applied
to a damp cloth.
• Always be careful when cleaning around safety warning labels. Use limited amounts of
cleaners in those areas.
3.3 Lubrication
3.3.1 Clamp
Send the knife down by activating a cut cycle and when the knife reaches the bottom, release only
the right cut button and turn off the power before releasing the left cut button. Disconnect the power
cord and remove the top cover for access. Wipe off any old or excess grease. Apply grease to the
areas shown in Figure 2 and Figure 3 below.
Figure 2
Figure 3
Grease Grease
Grease Leadscrew