User Manual

Raw Dawg Overdrive

This pedal gives Eric Gales all the seasoning he needs

to serve up some of the tastiest licks in the business.

It’s a classic crunchy OD circuit customized for a more

balanced midrange and a bump in gain, providing a

sweet, organic sound—even when it’s time to crank

up the heat.

EG74

jimdunlop.com/eg74

™

PAGE 1
EG74 Raw Dawg Overdrive ™ This pedal gives Eric Gales all the seasoning he needs to serve up some of the tastiest licks in the business. It’s a classic crunchy OD circuit customized for a more balanced midrange and a bump in gain, providing a sweet, organic sound—even when it’s time to crank up the heat. jimdunlop.
PAGE 2
External Controls 2 1 3 4 1 OUTPUT knob controls overall effect volume 2 TONE knob controls overall EQ 3 DRIVE knob controls overdrive intensity 4 KICKSWITCH toggles effect on/bypass (blue LED indicates on) EG74 | Raw Dawg™ Overdrive 2
PAGE 3
Basic Operation Power Directions The Raw Dawg™ Overdrive is powered by the Dunlop ECB003 9-volt adapter or the DC Brick™ , Iso-Brick™ , and Mini Iso-Brick™ power supplies. This pedal cannot be powered by a battery. 1. Run an instrument cable from your guitar to the EG74’s INPUT jack and another instrument cable from the EG74’s OUTPUT jack into your amplifier’s input. 2. Start with all knobs set to 12 o’clock. 3. Turn the effect on by depressing the footswitch. 4.
PAGE 4
Specifications Input Impedance > 450 kΩ Output Impedance < 100 Ω Noise Floor* < -100 dBV Gain 21 to 47 dB Bypass True Hardwire Current Draw 6 mA Power Requirements 9 VDC Measurements made at 1 kHz *All controls at mid-position, A-weighted EG74 | Raw Dawg™ Overdrive 4