FOLDING ADIRONDACK CHAIR Thank You for Choosing Our Chair For Parts and Service or Technical Support Email � days a week at productservicecenter@yahoo.
Before Assembly Important Note: �.Make sure all parts and hardware are including and free of obvious defect before disposing of any packaging. �.Do not tighten all screws and bolts until completely assembled. �.Assembly will require two people.
A C H F D B E F G For Parts and Service or Technical Support Email � days a week at productservicecenter@yahoo.
Step � Attach (H) to Seat (B) by inserting Bolts (AA) on each side AA H AA B Step � Attach Front Legs (F) to Seat (B) by inserting Bolts (BB) on each side into the corresponding holes. Secure each bolt with awasher and a nut come with bolt(BB) as pictured.
Step � Attach (G) to Front Legs (F) using bolts (AA) as pictured. F AA F G AA Step � Attach (E) to Seat (B) by inserting Bolts (BB) on each side and secure each bolt with a washer and a nut come with bolt(BB) as pictured on each side.
Step � Attach the the Arms (C) and (D) to the Front Legs (F) using Bolts (BB) and secure each bolt with a washer and a nut come with bolt(BB) as pictured. C BB C BB BB D F Step � Attach the Back (A) to the (E) using bolts (CC). Attach Back (A) to Arms (C) and (D) using bolts (DD) as pictured. Finally, please make sure that do not over thight the screws, in order to fold smoothly, also not too loose, in order to maintain stability.
IMPORTANT NOTE! NEVER adjust the level of recline while you are sitting in the chair, or while anyone else is in the chair. Always adjust with an empty chair and ensure that the back support is completely secure in the recline slots on each side of the chair. To fold the chair, lift the back support and gently push down on the back of the chair. And the chair will collapse down to the floor level.
