Data Sheet
Table Of Contents
- Abstract
- Version history
- 1. Product Introduction
- 2. Pins and dimension
- 3. Electrical Parameters
- 4. RF parameters
- 5. Antenna Information
- 6. Assembly Information and Production Guidance
- 7. Reference Circuit
- 8. FCC and IC Information
- 9. Module MOQ and Package Information
- 10. Sales Information and Technical Support
Datasheet [Page 24]
EMB1082
Note 1: Compliance of this device in all final host configurations is the responsibility of the Grantee.
OEM integrators are responsible to satisfy RF exposure requirements.
Note 2: Any modifications made to the module will void the Grant of Certification, this module is
limited to OEM installation only and must not be sold to end-users, end-user has no manual
instructions to remove or install the device, only software or operating procedure shall be placed in the
end-user operating manual of final products.
Note 3: The device must not transmit simultaneously with any other antenna or transmitter.
Note 4: To ensure compliance with all non-transmitter functions the host manufacturer is responsible
for ensuring compliance with the module(s) installed and fully operational. For example, if a host was
previously authorized as an unintentional radiator under the Declaration of Conformity procedure
without a transmitter certified module and a module is added, the host manufacturer is responsible for
ensuring that the after the module is installed and operational the host continues to be compliant with
the Part 15B unintentional radiator requirements. Since this may depend on the details of how the
module is integrated with the host, Shanghai MXCHIP Information Technology Co., Ltd. shall provide
guidance to the host manufacturer for compliance with the Part 15B requirements. The transmitter
module must be installed and used in strict accordance with the manufacturer's instructions as
described in the user documentation that comes with the host product.Shanghai MXCHIP Information
Technology Co., Ltd.is responsible for the compliance of the module in all final hosts.
Note 5: The module is limited to installation in mobile or fixed application
Note 6: The module supprot max antenan Gain is 2dBi
Note 7:This exterior label can use wording such as the following: “Contains Transmitter Module FCC
ID: P53-EMB1082” or “Contains FCC ID: P53-EMB1082” “Contains IC: 23507-EMB1082”
Note 8:The user can get the device MAC address via scanning the OR Code