2
T H E M X3 A P P The MX3 System is most beneficial when paired with the MX3 App. The App will store and track all hydration measurements and provide a wide range of data display and reporting capabilities. Features of the MX3 App include: + Organizational Accounts + Admin, Coach and Trainer Accounts with customizable access rights + Athlete Profiles with Measurement History To receive an installation link and instructions on how to set up the MX3 App please email: support@mx3diagnostics.
M X3 A P P M E A S U R E M E N T S To take measurements using the MX3 APP instead of Local mode follow these steps: 1 2 Turn on MX3 Device by pressing Use the direction button to the power button briefly. highlight APP and press select. 4 5 Select Measurement Follow the prompt to insert an MX3 Sensor, and then choose an then click the Measure athlete. measurement just as you would in Local mode. 14 button.
3 Ensure Bluetooth is enabled on the phone/ tablet to pair with the Device. Select Settings and press the Connect/Change button (arrow) to pair with an MX3 Device using the unique ID displayed on the Device. 6 7 8 The App will display the A measurement A summary of team MX3 SOSM reading. history can be viewed data can be viewed in You may now eject and for each athlete using the Home Icon discard the sensor. the Athletes Icon.
S A M P L E C O L L EC T I O N R EC O M M E N DAT I O N S To produce a saliva sample, generate saliva actively and scoop saliva outwards against your bottom lip using your tongue. To optimize the accuracy of measurements taken with the MX3 System, we recommend the following: + Wait at least 10 minutes after any liquid consumption before taking a measurement. + Try to maintain a consistent approach to how and where saliva samples are taken. + Do not eject sensor until prompted by Device or App.
INTERPRETING MEASUREMENTS In basic terms, SOSM values increase as dehydration increases, and they decrease as hydration status improves. Most people will exhibit a gradual increase in SOSM as they exercise. This relative change in SOSM is reflected in the status scale bar that appears in the MX3 App immediately after a measurement is taken.
TROUBLE SHOOTING The Device does not turn on Make sure Device is charged. Plug the USB-C cable into the charging port, wait a few minutes and try to turn on the Device again. The Device doesn’t appear in the device list in the App Make sure your Device is turned on. Make sure Bluetooth is enabled on your iPhone/iPad. The Device does not play a tone when a sample is taken The Device is displaying a “bad sensor” message and beeping The Device will play a tone when sufficient saliva is taken.
F R EQ U E N T LY A S K E D QUESTIONS Why do I see different SOSM values when I take multiple readings? Each saliva sample is a complex combination of saliva from many different salivary glands. It is normal to see a small amount of variation from reading to reading, even when these are taken only a few seconds apart. Why is there a batch number on the sensor packaging? The MX3 Device must be calibrated to work with each new sensor batch, and has already been calibrated for use with the provided sensors.
FCC COMPLIANCE This product complies with FCC part 15.247 as a DTS device. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation. NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE.
C O N TAC T U S For further questions about the MX3 System please contact us: MX3 Diagnostics, Inc. 2701 Stratford Drive Austin, TX, 78746 USA MX3 Diagnostics Pty. Ltd. Suite 43, 255 Drummond Street Carlton VIC 3011 Australia For sales inquiries: sales@mx3diagnostics.com For technical support: support@mx3diagnostics.com Website: www.mx3diagnostics.
mx3diagnostics.
