User manual

7
Modification reserved
• 19, rue de Rennes • BP 83221 • F - 35690 ACIGNÉ
1.2 LOADER USE LIMITS ON A TRACTOR WITH A ROLL CAGE WITH 2 UPRIGHTS
Additional information for a tractor fitted with a roll cage with two uprights.
1.2.1 Warning
If the tractor is not fitted with a falling object protective structure or a roll-over protective structure with four uprights
(tractor with roll cage with 2 uprights), the driver is exposed to a permanent risk when handling loads.
Reminder: only implements recommended by the MX loader manufacturer may be used.
1.2.2 Usage precautions
For safe work, the following usage precautions must be observed:
— Use the implement designed for the work to be carried out.
— Adjust the indicator rod according to the implement used.
— Ensure the stability and hold of the load in the implement.
— The maximum loading level of the implement must not exceed the lowest side for bulk loads, and not exceed the height
of the backplate for unit loads (see Fig. 1).
— Move the tractor-loader unit carefully.
— Travel with the load at ground level and at moderate speed.
— During a lifting operation and when moving, keep your eyes on the load from when the implement’s pivot point (A)
passes the horizontal of the loader’s pivot point (B) (see Fig. 2). If necessary, correct the position of the implement
so that the load is never directed towards the driver (see Fig. 3).
Fig. 1 Fig. 2 Fig. 3
Bulk load
Unit load
Pallet type
(A)
(B)
(A)
(B)
OK
1.3 NON-COMPLIANCE WITH THE INSTRUCTIONS FOR SAFETY AND USE
— The MX loader’s hydraulic circuit is designed to withstand a maximum service pressure of 200 bar.
— Never make any changes to the hose connections.
— Breaking lead seals will void any liability on the part of MX for all its equipment.
— Any assembly of the MX loader which ignores the recommendations of the MX price list in force at the purchase date
cancels the MX guarantee for the whole supply.
— Any modification to any part of the MX supply (implements, loader, frame, etc.), or use of an implement or component
installed on the MX loader not of MX origin, cancels the MX guarantee on the entire supply.
— Use only genuine MX spare parts. Do not carry out any modifications yourself or have anyone else do so on your MX
loader and its implements (mechanical, electrical, hydraulic or pneumatic specifications) without seeking prior approval
in writing from MX. Failure to comply these rules may make your MX loader hazardous. In the event of damage or injury,
MX shall not be held responsible in any way.
— Warranty cover will cease immediately in the event of failure to observe the standards and instructions for use
and maintenance of the MX loader as stipulated in the user manual. MX shall not be held responsible for accidents
that might result from actions contrary to these restrictions.