User manual

25
Modification reserved
• 19, rue de Rennes • BP 83221 • F - 35690 ACIGNÉ
16. SAFETY WHILE LIFTING *
If the loader is used for any lifting operations requiring the presence of persons near the load when the loader is in raised
position, the hydraulic circuit of the lifting arms must be fitted with a safety device. This in compliance with standard
EN 12525 + A2 2010.
* Depending on configuration
17. USAGE RECOMMENDATIONS
— Each implement has been designed for a specific use and has its own resistance limits.
— Land clearing and stump pulling are prohibited. This work must be done with specialized machinery and is not
appropriate for the agricultural loader.
— Use the tractor’s driving power to penetrate into the material to be moved rather than speed, which subjects the loader
and tractor to high stresses.
— When the load to be moved is too big, do not force on the hydraulic components. The same applies when the rams
are fully extended. Release the control valve levers
Work flexibly and carefully.