User manual

MX C3u, C3, C3+
1
2
MX 30C+
2
1
23
Modification reserved
• 19, rue de Rennes • BP 83221 • F - 35690 ACIGNÉ
14. SHOCK ELIMINATOR *
Shocks are eliminated during movement or when stopping
the loader quickly when lowering.
— Supension on (1).
— Supension off (2).
* Depending on configuration
15. LOADER MAINTENANCE
Drain the tractor’s hydraulic circuit regularly and change the filters following
the manufacturer’s recommendation.
Polluted oil stops lubricating, and wears all the hydraulic components
(pumps, control valves, rams). Even clear oil can be overused.
For tractor maintenance operations, it is strongly recommended to unhitch the loader. Unhitching is a simple quick
operation that provides the best guarantees of safety and efficiency for tractor maintenance.
For any work with the lifted loader, the loader must be locked in position:
Closure of the supply valve of the lifting rams (see the "LOADER UNHITCHING" section).
When using a pressure washer, avoid spraying water on electric components.
Clean the implement and the front of the loader after every use.
Slurry acid, fertiliser and silage can damage paint, steel and pivot points.