User manual

MX 30C+
MX C3, C3+
MX 30C+
MX C3, C3+
19
Modification reserved
• 19, rue de Rennes • BP 83221 • F - 35690 ACIGNÉ
— Start up the tractor, then lower the loader by dumping.
When the implement touches the ground, reverse slightly
in line and continue to lower the loader.
9. IMPLEMENT HITCHING - MX C3, C3+, 30C+ LOADERS
This operation must be carried out by the driver who must leave the seat and ensure all
manoeuvres are forbidden while he is working on the loader.
— Make sure that the unlocking lever is in "HITCHING" position:
spindles in, springs compressed.
— Approach the loader in line with the implement, with
the implement carrier slightly dumped.