Quick Manual

7
Chapter 5 Settings
You can use setting to re-configure your network, display, language and etc.
5.1 Network &Time settings
5.1.1Wifi Settings
- Network-> Wi-Fi/Ethernet, by “IP settings: DHCP”, when plug ethernet cable, ethernet settings will display
“Connected”.
- If select “Static IP”, click “static” in IP settings, revise address in IP address bar, network gateway bar and DNS
bar, click “Save”.
5.1.2Time Settings
-Select ”time and date” and ”Time Zone from Settings.
5.2 Sound settings
5.3 Language settings
5.2.1 System sounds
The standard setting is switch on.
5.2.2 Surround sound
Click “Surround sound”, there are
(Auto/Always/Never) 3 options for choosing.
5.3.1 OSD language settings
Click “Language Setting”, select the language as
OSD language from language list, click “ok” to
save and back.