Technical data

Page
7
5. Connect the black wire of the interface cable kit to ground
(Power Plug Pin8) and the red wire to 12V permanent plus
(Power Plug Pin7).
6. The 3,5mm mini jack socket of the cable kit is used
to connect the corresponding control cable (e.g. “STK-AL25“
for DVD Alpine devices) for device controls.
The optionally available Y-Adapter “CABLE-415“
(sold separately) allows to connect the IR-receiver of the
video source parallel to the interface.
(Please refer to pages 9 and 10 for details regarding control cables.)
7. Use a Video / Audio cinch cable (sold separately) to connect
the video source to the three cinch sockets of the interface.
8. Re-attach the navigation system to the center console.
Function and Controls:
Activation:
In order to activate controls for the connected devices
the system needs to be switched to TV mode by pushing
the “AUDIO/TV“ button followed by the “TV“ button.
ST
K
-
xxxx cable kit