Operation Manual

Technical specification

4. In step 1 and step 2, press [Exit] key can draw back from this item and

without saving.

7.4 Software Upgrade

1. We offer the functions for user to connecting receiver (Master) to the other

receiver (Slave) via serial interface to upgrade software code and program

list.

2. Connect master receiver to slave receiver via serial interface. Enter

“Software Upgrade” menu in master receiver and press [◄/►] keys to

switch upgrade mode.

3. Upgrade modes include: allcode / maincode / videoback / radioback /

defaultdb / userdb

4. Turn on slave receiver and it needn’t operate any setting.

5. Moving highlight to “Start” on master reeciver and press [OK] key to start

upgrade.

6. Press [Exit] key to save the parameters and draw back.

7.5 SatcoDX Auto Programming

This function is using the tables of the SatcoDX websites to update your

channel and satellite lists. You need a special application which is available on

the CD-ROM of the Tele-Satellite magazine. Install this software on your PC

first.

1. Start the SatcoDX application on your PC.

2. Select “SatcoDX Auto Programming” item from the “Tools” menu and press

[OK]. The screen will show the message “OK to Proceed”.

3. Press [OK] again and you will see the message “Ready to Download”.

4. In the PC application set the Baud Rate to 115200 and start the download

procedure.

! Caution:

The new download channels will delete the original channels list.

Please be careful before using it.