Operation Manual
32
Menu Operations
1. In “Parental Lock” function, press [OK]
key, there will pop an dialogue for you
to input the password. The default
password is “0000”. When you input the
correct password, you will see a screen
like right:
2. Menu Lock determining that when user
wish to enter “Installation” menu,
whether have to input password or not. If the setting of “Menu Lock” is
“Yes” which means user have to key in password, set “No” means unlock.
3. Channel Lock determining that when user wish to play the lock channels,
whether have to input the password or not. If the setting is “Yes”, play the
channels with lock mark will show up a dialogue on the screen and ask for
the password. If the setting of “Channel Lock ” is “No”, the Lock function will
invalid.
4. New Password is used for revising password; you can input the new
password in this item by using number keys directly. After you filled in 4
digital numbers, the highlight will auto skip to Confirm Password and ask
you to input the new password again. If the password is correct, the screen
will show up a message of “Change password successfully”. After finish
saving and draw back to “System Setup” menu, the revising is complete.
5. Press [Exit] key to exit the current menu.