Operation Manual

Menu Operations

6.5 OSD Setting

When you enter to “OSD Setting” menu, you will see a screen like right:

1. Subtitle Display: You can press [◄/►] key to select “On” or “Off”. If the

current channel has subtitle information, it will be showed up while this

function is “On”. If this function is “Off”, there won’t show up subtitle

information even if the current channel has subtitle information.

2. OSD Timeout: When you switch channels in full screen, there will show up

some information about current channel on the lower of the screen. And

regarding to the duration of these information show up on the screen, you

can press [◄/►] key to switch the time. The range of the duration is “1

second ~ 10seconds”.

3. OSD Transparency: Besides the setting of “OSD Menu Style”, you also can

set the transparency of OSD. You can press [◄/►] key to select the values.

There are 9 levels of transparency, 10%,

20%, 30%, 40% 50%, 60%, 70%, 80%

and Off (means no transparency

function).

4. Load OSD Setting Default: If you are not

satisfy with your setting, you can move

highlight to this item and press [OK] key

to reset parameters as default value.

5. Press [Exit] key to exit the current menu.

6.6 Parental Lock

You can set a password for anyone who wishes to operate in the “Installation”

menu. And you can also set the password for the lock channels. (How to set the

lock channel please refer to LOCK) Here will show you how to setting and how

to revising the password.