Operation Manual

25
Menu Operations
5.6 Satellite Guide
When you enter Satellite Guide menu,
you will see the screen like beside:
Here you can enter your local longitude and
latitude and the satellites longitude. The
receiver calculates the antennas
orientation and elevation to point your
antenna to the selected satellite.
1. Use the [Number] buttons to input the
values of Local Longitude, Local Latitude and Satellite Longitude.
2. In the Calculate item press [OK], the receiver auto calculates the
antennas orientation and elevation to point your antenna to the selected
satellite.
3. Press [Menu / Exit] to return to the previous menu.
5.7 Unicable Configuration
Here you have two way to detect the frequency of Unicable LNB:
1. Auto Config: just press [OK], and you will see below window, after the
massage disppear, press [Vol/] to choose the frequency, then "exit".
2. Manual Config: Press [OK] and you will see below menu.
Here you need to know the IF Channel and IF Frequency of the Unicable
LNB you are using, then press [Vol/] to choose the IF Channel and IF
Frequency accordingly, then press exit for saving data.
3. InstallationàSingle searchàLNB ConfigurationàLNB type
Settings must be as below:
LNB type: Unicable
First Frequency: 9750MHz (press [Vol/]
to choose)
Sencond Frequency: 10600MHz. (press
[Vol/] to choose)
Save all above settings, and back to
Single Search menu, and start to search.