Operation Manual

20
Menu Operations
5.2 Multi Search
When you enter the Multi Search menu a
window like the one beside will open.
1. In the Satellite item press [Vol/]
to select the satellite which you want
to scan or press [OK] to open the
satellite list to select directly with
[CH/], and press [OK] to
mark/unmark and [MENU] to finish the
selection. You can select several
satellites in this menu. The system will use DiSEqC1.0/1.1, DiSEqC1.2 and
USALS functions to search the marked satellites and scan channels.
2. On FTA Only item, press [Vol/] to select scanning of all channels or
just scanning of free channels. If you select Yes, it will scan free channels
only.
3. On Scan Channel item, press [Vol/] to select the scanning range from
TV + radio channels, only TV channels or only radio channels.
4. On Scan Mode item, you can select Auto Scan, Preset Scan or NIT
Search to blind scan preset transponders or network transponders of the
selected satellite.
5. Select Search and press [OK] to start scanning. In the lower part of the
window the progress of scanning and the found channels are displayed.
6. Press [Menu/Exit] to cancel or finish the scanning and saving the found
channels.
5.3 TP Scan
When you enter TP Scan menu a window
like the one beside will be displayed.
1. In the Satellite item press [Vol/] to
select the satellite which you want to
scan or press [OK] to open the satellite
list to select directly with [CH/],
press [OK] to confirm it.