Operation Manual

19
Menu Operations
! Notice: After choosing LNB type Universal you cannot modify 22K.
DiSEqC1.0: Use [Vol/] to switch the options or press [OK] to open the
DiSEqC1.0 option list to select directly with [CH/], press [OK] to
confirm it.
DiSEqC1.1: Use [Vol/] to switch DiSEqC1.1 option or press [OK] to
enter DiSEqC1.1 option to select directly with [CH/], press [OK] to
confirm it. The options of this item are: Disable / CCard1 M1 Port1 /
CCard1 M1 Port2 / CCard1 M1 Port3 / CCard1 M1 Port4 / CCard1 M2
Port1 / CCard1 M2 Port2 / CCard1 M2 Port3 / CCard1 M2 Port4 / CCard1
M3 Port1 / CCard1 M3 Port2 / CCard1 M3 Port3 / CCard1 M3 Port4 /
CCard2 Port1 / CCard2 Port2 / CCard2 Port3 / CCard2 Port4 / CCard2
Port5 / CCard2 Port6 / CCard2 Port7 / CCard2 Port8 / CCard2 Port9 /
CCard2 Port10 / CCard2 Port11 / CCard2 Port12 / CCard2 Port13 /
CCard2 Port14 / CCard2 Port15 / CCard2 Port16.
Positioner: Press [Vol/] to select between Off / DiSEqC1.2 / USALS.
! Notice: When you select DiSEqC1.2 or USALS, DiSEqC1.0 and
DiSEqC1.1 items will be disabled.
Polarity: Press [Vol/] to switch between Auto / H / V .
Toneburst: Press [Vol/] to switch this function On or Off.
3. DiSEqC1.0 4Port: Use [Vol/] to switch the options of DiSEqC1.0.
Between Disable / LNB1 / LNB2 / LNB3 / LNB4.
4. TP Index: Use [Vol/] to select the desired transponder or press [OK] to
open the TP list to select directly with [CH/], press [OK] again to
display the TP number where the channel can be found.
5. FTA Only: Press [Vol/] to select to scan only free channels or even
scrambled channels. If you select Yes it will scan free channels only.
6. Scan Channel: Press [Vol/] to select to scan TV + radio channels, or
just TV channels or just radio channels.
7. Scan Mode: You can select Auto Scan, Preset Scan or NIT Search to
blind scan preset transponders or network transponders of the selected
satellite.
8. Search: Press [OK] to start scanning. In the lower part of the window the
progress of scanning and the found channels are displayed.