Operation Manual

18
Menu Operations
5. Installation
After selecting the installation menu you
can see the window like beside.
In Installation menu;
1. Press [CH/] to select menu items
among Single Search, Multi Search,
TP Scan, Satellite List, TP List
Satellite Guide and Unicable
Configuration.
2. Press [OK] to enter the selected item.
5.1 Single Search
After selecting Single Search you will see
a window like beside:
1. In the Satellite item press [Vol/]
to select the satellite which you
want to scan or press [OK] to open the
satellite list to select directly with
[CH/], press [OK] to confirm it.
2. LNB Configuration: Press [OK] to enter
LNB configuration, you will see a
window like beside:
LNB Type: Press [Vol/]
to switch among Standard, User
and Universal mode.
For Example: If you use a Dual LNB,
then you should select User option in
LNB Type and set the correct
frequency in LNB type.
22K: Use [Vol/] to switch ON and
Off. The 22KHz signal is used in KU universal LNBs to change between
low band and high band.